Laboratory Acid And Alkali Resistant Black Epoxy Resin Worktop Flat
Edge / Eased Edge Worktop
1. Product Description:
Color: Black
Size: 1500*750
Thickness: 19 mm
Surface: Matt
Mini order : 50 Square meters
Delivery time: 15-30 days after receipt of deposit.
2. Properties of Epoxy Resin Worktop
A) 24 hours super corrosion resistance
Inert materials have strong resistance to most corrosive chemicals.
Resistance to high temperature
B) And laboratory common high temperature 600 degrees, not foaming,
not broken, especially suitable for a long time to place the
combustion furnace ventilation cabinet.
C). Absolute moisture
The epoxy resin worktop with low water absorbition, does not absorb
moisture in the air, the installation will not warp deformation,
especially suitable for the operation of splash zone.
D). Pollution resistance
Surface is smooth, no stoma, not to hide the dirt, effectively
restrain bacterial growth, such as the SARS virus, etc.,especially
suitable for the medicine and biological laboratories.
E). Safe and reliable
Do not contain asbestos ingredient, nonflammable, non-conductive,
do not produce poisonous gas when heated, will not violate the
safety and health of operator.
F). Durable
One core, not to take off layer, not inflation, not cracked,surface
scratches can be repaired after renovation
G). High performance to price ratio
Unique 19mm thickness, the market is the highest price of the
laboratory table system.
H). Beautiful appearance
Smooth surface (MATT finish) , light reflection, easy to clean,
easy maintenance.
I). Uniform color
Ensure the color of different batches of products is permanent, can
be used for multi color selection.
3. Common specification sheet (Unit : mm)
Long | Wide | Thickness |
| 1200 | 700(750) | 16/19/25 |
| 1500 | 700(750) | 16/19/25 |
| 1800 | 700(750) | 16/19/25 |
| 2400 | 700(750) | 16/19/25 |
| 3000 | 700(750) | 16/19/25 |
4. Chemical Test Results for Black
| No. | Chemical Reagent | Actual Rating |
| 1 | Carbon Tetrachoride | 1 |
| 2 | Chloroform | 1 |
| 3 | Chromic Acid,60% | 1 |
| 4 | Cresol | 0 |
| 5 | Dichlor Acetic Acid | 0 |
| 6 | Dimethylformanide | 0 |
| 7 | Dioxane | 0 |
| 8 | Ethyl Ether | 0 |
| 9 | Formaldehyde,37% | 0 |
| 10 | Formic Aicd,90% | 0 |
| 11 | Furfural | 0 |
| 12 | Gasoline | 0 |
| 13 | Hydrofluoric Acid,37% | 1 |
| 14 | Hydrofluoric Acid,48% | 3 |
| 15 | Hydrogen Peroxide,30% | 0 |
| 16 | Lodine,Tincture of | 0 |
| 17 | Methyl Ethyl Ketone | 0 |
| 18 | Methylene Chloride | 1 |
| 19 | Mono Chlorobenzene | 1 |
| 20 | Naphthalene | 0 |
| 21 | Nitric Acid,20% | 0 |
| 22 | Nitric Acid,30% | 0 |
| 23 | Nitric Acid,70% | 0 |
| 24 | Phenol,90% | 0 |
| 25 | Phosphoric Acid,85% | 0 |
| 26 | Silver Nitrate,Saturated | 0 |
| 27 | Sodium Hydroxide,10% | 0 |
| 28 | Sodium Hydroxide,20% | 0 |
| 29 | Sodium Hydroxide,40% | 0 |
| 30 | Sodium Hydroxide,Flake | 0 |
| 31 | Sodium Sulfide,Saturated | 0 |
| 32 | Sulfuric Acid,33% | 0 |
| 33 | Sulfuric Acid,77% | 0 |
| 34 | Sulfuric Acid,96% | 3 |
| 35 | Sulfuric Acid,77% and Nitric Acid 70%, | 0 |
| equal parts |
| 36 | Toluene | 0 |
| 37 | Trichloroethylene | 1 |
| 38 | Xylene | 0 |
| 39 | Zinc Chloride, Saturated | 0 |
| Rating scale: | Level 0--No detectable change |
| Level 1--Slight change in color or gloss |
| Level 2-- Slight surface ething or severe staining |
| Level 3--Pitting,cratering,swelling, or erosion of coating.Obvious
and significant |
| deterioration |
| Acceptance level: | Laboratory grade finishes shall result in no more than four level 3
conditions. |
| Suitability for a given application is dependent upon the chemicals
used in a given laboratory |
