Laboratory TableTop Of Quality Inspection Department Of
Pharmaceutical Company
1. Product description
Frame: 40*60*1.2mm galvanized steel pipe
Worktop:12.7mm black phenolic resin worktop
Size: L*750*800/850 mm
Physical and chemical plate color is rich, have such as bright
surface of dumb light of a variety of surface texture, its surface
after the special chemical treatment has more powerful chemical
resistance performance.
Phenolic resin worktop is manufactured by pressing melamine resin
impregnated decorative paper over layers of phenolic resin impregnated kraft
paperat high pressure
and temperatures.
Comprehensive erosion resistance against acid and alkali, three
levels of protective structure: 1. The Chemical membrane Chemical -
resistant qualities.2. The color Paper Deco Paper;3. Special
multi-layer Kraft Paper (Kraft Paper).
2. Applications include:
Science Labs
Physics Labs
Chemistry Labs
Biology Labs
Research Facilities
Mechanical Labs
Anywhere where shelving units are required
3.Bench worktop Size:(Unit : mm)
| Long | Wide | Thickness |
| 1200 | 700(750) | 12.7/16/19 |
| 1500 | 700(750) | 12.7/16/19 |
| 1800 | 700(750) | 12.7/16/19 |
| 2400 | 700(750) | 12.7/16/19 |
4.Maintenance method of Countertop
1).Do not use sharp hard objects to delineate the table.
2).Do not rotate for a long time in an environment where the
temperature exceeds 135℃
3).Do not expose to open fire, molten metal, metal sparks or direct
sunlight, nor can it be used for cutting surface.
4).The flame of coal vapor lamp or alcohol lamp will damage the
table surface, so the alcohol lamp or gas lamp must be put on the
triangle rack for use.
5).It is recommended to use warm water, acetone or mild detergent
to clean the table. Hand washing or dishwashing detergent can be
used instead of abrasive and strong acid detergent to avoid
damaging the surface. For stubborn stains, hypochlorite can be
dripped onto the surface of the contaminated corrosion resistant
physical and chemical board and washed out with clean water.
6).For composite countertops such as veneer boards, water should
not be allowed, especially corrosive solvents should not be allowed
to remain in the seals around the countertops, otherwise the
countertops will be damp and swell.
